Mobile Cellphone Unlocker | IMEI Unlocking Codes | Phone Unlock Codes | Network Sim unlock

  
   
   Checkout the new website
   
 
             

[Sitemap]

  

 


 

  

 

   
           

 

      
Bookmark and Share
 

 
Home | Phone Unlocking | Phone Deals | Accessories | FAQ's | Contact us |

 Checkout

 
  
 

 

 
 
Sonyericsson Ultimate Unlocker Instructions
Sonyericsson Ultimate Unlocker Software Unlocks and repairs the following models;
 

Aino, Bejoo, C510, C702, C901, C902, C903, C905, F100, G502, G700, G705, G900, J105, Jalou, K310, K320, K530, K510, K550, K550 i-mode, K630, K610, K610 i-mode, K618, K630, K660, K770, K790, K800, K810, K818, K850, Kita, M600, M608, Naite, P1, P990, S500, T650, T658, T700, T707, T715, T717,  TM506, U10, U100, V630, V640, Z530, W200, W300, W508, W518, W580, W580 i-mode,  W595, W610, W660, W705,  W707, W710, W715, W760, W810, W830, W850, W880, W888, W890, W902, W908, W910, W950, W958, W960, W980, W995, Xperian, Yari, Z530, Z610, Z710, Z750, Z770, Z780

Note: This software unlock all variants of the above models.
 
 

How to unlock your Sonyericsson Phones using the ultimate unlocker software.

  • Download the latest version of the Ultimate unlocking Software using the link above
  • Use the link below to order a username and password to unlock you phone using the link below
  Order unlock your unlock credit
 
  1. Extract the contents of the downloaded zip file onto a folder on your PC.
     
  2. The download contains the unlock software and USB drivers. If you have not previously installed the USB drivers for your phone follow the instructions here to install the drivers before continuing
     
  3. Run UltimateUnlocker.exe to open the unlocking software

     
  4. Go to the 'Settings' tab and enter your username and password then click the save changes
    (use the link at the top of these instructions to order a username/password)

    Make sure that Server address is: 60.54.216.58 and Port is:9001

    You will need to ensure that your firewall and/or router will allow connection via Port 9001. If you're unsure on how to do this then you can temporarily disable your firewall whilst running the unlocker to ensure communication to the server are not being blocked.
     
  5. Go to the 'Job' tab and select the Model you wish to unlock from the 'Phone Model' drop down box

     
  6. Now select your unlock option from the 'SecurityZone Operation' menu


    -     Direct Unlock (+Sec.zone rebuild) - Use this option to let the software unlock the phone for you automatically

    - Direct Lock (+Sec.zone rebuild) - Do not use! This option is to RELOCK your phone to a particular network!

    - No Lock Change - Use the option to get the software to simply read and display the phones unlock codes. Make sure the 'show
      codes box has a tick in it. You will then need to manually enter the codes into the phone to unlock it.
      Instructions on how to enter the code can be found here

     

  7. Now depending on your cable you need to select one of the following options to start the unlocking process...

    For DCU60/65 then you need to connect the phone switched off holding down the 2 and 5 buttons on the keypad. Unless your model is a W880/W888 in which case you hold down the 2 and * keys instead.

    or for the UC10 or UC20 then you need to click the device in the top left hand corner of the client (under 'Devices') then follow the prompts on screen.


 

 

Installing your phones USB drivers.

If you haven't  previously installed the USB cable drivers for your phone, use the instructions below to install the drivers.
After you have installed the drivers you can then follow the instructions above to unlock your phone.

  1. Click here to download the USB drivers and extract them to a folder on your PC
     
  2. Make sure the phone is powered off and battery and cable are removed
     
  3. Insert the battery, press and hold down the C button on the phone
     
  4. A found new hardware wizard will appear and ask you to search windows update -  select not at this time and then choose:
    Install from a list or specific location (Advanced)
     
  5. Click "Browse" and navigate to the downloaded 'Drivers' folder
    Note: choose the relevant driver for the cable that you are using.  Drivers in the 'USB Flash...' folder tend to be the most popular. If not try the drivers in the other folders.
     
  6. Once you locate the correct driver click 'Next. and then 'Finish'. The phone may power on itself after a minute.
     
  7. When driver installation is finished, disconnect the phone and remove the battery for a couple of seconds then re-insert it.